Electrolux FAC124P1A Provozní pokyny stáhnout pdf (Strana 90)

Section 4 Component Teardown

4-30

Air Vent Lever and Door Removal

To remove the air vent lever and door:

1. Disconnect the power supply from unit.

2. Remove front panel and cabinet wrapper/sleeve.

3. Extract the two screws securing the air vent lever to

the partition. (See Figure 4-76)

4. Release retainer latches and pull air vent lever from

unit.

5. The air vent door is removed by releasing the

retaining latches from the front of the partition and

then pushing the air vent door through the partition

until free from unit. (See Figure 4-76)

Control Box Cover Removal

1. Disconnect the power supply from unit.

2. Remove front panel and cabinet wrapper/sleeve.

3. Extract the two screws at the front of the unit

securing the control box cover to the control box.

(See Figure 4-76)

4. Extract the screw from the compressor side of the

partition securing the control box cover in place.

(See Figure 4-76)

5. Pull cover from control box.

Control Box Component Removal

The control box houses the control board, capacitor and

terminal block. The power cord enters the control box

along the lower right side and is held in position with a

grommet.

1. Disconnect the power supply from unit.

2. Remove front panel and cabinet wrapper/sleeve.

3. Discharge capacitor.

To remove the capacitor:

4. Extract the screws securing the retaining band to

bottom of control box. (See Figure 4-77)

5. Disconnect all wire leads from capacitor. Label as

needed for proper reconnection.

Screws

Control Box

Cover

Air Vent Lever

Control Box

Cover Screw

Air Vent

Screws

Air Vent

Door

Control

Board

Air Vent

Retaining

Latches

Figure 4-76.

To discharge the high voltage capacitor, wait for 60

seconds and then short-circuit the connection of the

high-voltage capacitor (that is the connecting lead of

the high-voltage rectifier) against the chassis with the

use of an insulated screwdriver.

CAUTION

PP44

CCNN33

PP22

PP33

CCNN44

CC NN 11

Screws

Capacitor

Fan Motor

Capacitor

Transformer

Power Cord

Screws

Screw

Ground Screw

Figure 4-77.

Figure 4-78.

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 139 140

Komentáře k této Příručce

Žádné komentáře

Electrolux FAC124P1A Provozní pokyny Strana 90

Komentáře k této Příručce

Související produkty a manuály pro Split-systém klimatizace Electrolux FAC124P1A