EN Installation Instructions
Gas type Regulation Other gas typeG20 20 mbar shut by 1/2 turn G30/G31 28-30/37 mbarshut G30/G31 50 mbarG30/G31 28-30/37 mbar shut G30/G31 50 mbaropen
ENGLISH11
electrolux.com/shop867323329-A-442016
1. INSTALLATION INSTRUCTIONS1.1 General information• Connection and commissioning of thegas cooker must be in conformity withlocal and national law an
of the parts near the oven. Contact thefurniture producer in case of any doubts.This appliance of the third class isdesigned to be built-in in kitchen
1.9 Electrical connectionStandard socket, type 13.The electrical installation must have anisolation device which lets you disconnectthe appliance from
1. Build-in gas oven with hob 1985 - 1997without wooden surroundR5544 (560)55 (36)2020-50490 (526)Cut-out for the hob in a synthetic resin orstone wor
2. Fix the oven with 2 screws at everyside.A3. Open the door to access the gasinstallation.4. Connect the oven to the gas supply.1.12 Installing burne
1.13 Installing the metal burnerplate1. Place the hob in the cut-out.2. Secure the hob in place using the 4screws. Place the screws in theproper holes
Picture 12. Carefully clean the worktop aroundthe cut-out and the cut-out edges.3. The rubber seal (A) has to be gluedonto the surface where the workt
Gas type Burner InjectorMark1/100 mmNomi-nalheatinputkWReducedheat in-put kWGas consumptionm3/hg/hG30 G31Liquid gas(3+)28-30/37mbarSemi -rapid71 2.0 0
Komentáře k této Příručce