Electrolux EHL2S7000W Uživatelský manuál stáhnout pdf (Strana 22)

AB

min. 20

10

20

A

5. Use at least 2 screws to fix the oven on

both sides (Detail A).

Warning! When installing next to a

wood-fuelled boiler, a heatproof and

heat-insulating plate must be mounted

at the height of the appliance and at

least 30 cm deep.

Electrical connection

Use a power cable of H05VV-F or higher.

Connect the appliance to a socket supply

line. If there is no socket supply line, the

electrical installation must have an isolation

device which lets you disconnect the appli-

ance from the power supply. The isolation

device must have a contact opening width

of minimum 3 mm (in reference to NIN SEV

1000). The customer must have a socket

for the electrical connection that is accessi-

ble and outside the coordination room. The

length of the connection cable must be ap-

proximately 120 cm with lines connected

directly to the power supply.

D

E

F

Important! Only a qualified person can

connect the appliance to the electricity

supply.

1.

Open the mains terminal cover (D).

2. Put the connection cable into the sup-

plied rings (E). This is to prevent the

cable from rubbing against the drawer.

The connection cable is on the housing

side.

3.

Install the cable grip (F).

4.

Connect the terminal as in the illustra-

tion.

5.

Put the cable into the strain relief

clamp.

6.

Close the mains terminal cover.

Connection diagram 400 V

Phase definitions: L1, L2, L3 (or R, S,T)

Warning! If service is required always

disconnect the appliance from the

power supply.

ENVIRONMENT CONCERNS

Recycle the materials with the symbol .

Put the packaging in applicable containers

to recycle it.

Help protect the environment and human

health and to recycle waste of electrical and

electronic appliances. Do not dispose

22

1 2 ... 17 18 19 20 21 22 23 24

Komentáře k této Příručce

Žádné komentáře