Electrolux EBSL80ASP Uživatelský manuál stáhnout pdf (Strana 33)

REMOVING THE SHELF SUPPORTS

2

1

You can remove the shelf supports to clean

the side walls.

1.

Pull the front of the shelf support away

from the side wall.

2.

Pull the rear end of the shelf support

away from the side wall and remove it.

Install the shelf supports in the opposite se-

quence.

The rounded ends of the shelf sup-

ports must point to the front.

OVEN LAMP

WARNING!

There is a danger of electrical

shock!

Before you change the oven lamp:

• Switch off the oven.

• Remove the fuses in the fuse box or

switch off the circuit breaker.

Put a cloth on the bottom of the

oven for protection of the oven light

and glass cover.

Replacing the oven lamp

1.

You can find the lamp glass cover at

the back of the cavity.

Turn the lamp glass cover counter-

clockwise to remove it.

2.

Clean the glass cover.

3.

Replace the oven lamp with applicable

300°C heat-resistant oven lamp.

Use the same oven lamp type.

4.

Install the glass cover.

Replacing the oven lamp:

1.

You can find the lamp glass cover at

the left side of the cavity. Remove the

left shelf support rail.

2.

Use a narrow, blunt object (e.g. a tea-

spoon) to take off the glass cover and

clean it.

3.

If necessary: Replace the oven lamp

with applicable 300°C heat-resistant

oven lamp.

Use the same oven lamp type.

4.

Install the glass cover.

5.

Install the left shelf support rail.

ENGLISH 33

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 39 40

Komentáře k této Příručce

Žádné komentáře