Electrolux ESI6510LOX Uživatelský manuál

ESI6510LOXESI6510LOW... ...EN DISHWASHER USER MANUAL

•The programme indicator continues to flash.• The acoustic signals operate. E.g.five intermittent acoustic signals =level 5.• The display shows the cu

6.3 Filling the rinse aid dispenserABDCMAX1234+-ABDC1.Press the release button (D) to openthe lid (C).2.Fill the rinse aid dispenser (A), nomore than

7.1 Using the detergentABD3020CMAX1234+-B2003A DC1.Press the release button (B) to openthe lid (C).2.Put the detergent in the compartment(A) .3.If the

Opening the door while theappliance operatesIf you open the door, the appliance stops.When you close the door, the appliancecontinues from the point o

• Make sure that the spray arms canmove freely before you start a pro-gramme.8.3 Using salt, rinse aid anddetergent• Only use salt, rinse aid and dete

A1A22.To disassemble the filter (A), pullapart (A1) and (A2).3.Remove the filter (B).4.Wash the filters with water.5.Before you put the filter (B) bac

Problem Possible solution Press Start. If the delay start is set, cancel the setting orwait for the end of the countdown.The appliance does not fill

•The programme indicators and go off.• The programme indicator continues to flash.• The display shows the current set-ting.Rinse aid dispenser offRi

18www.electrolux.com

ENGLISH 19

CONTENTS1. SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32. PRODUCT DESCRI

www.electrolux.com/shop156966160-A-072013

1. SAFETY INSTRUCTIONSBefore the installation and use of the ap-pliance, carefully read the supplied in-structions. The manufacturer is not re-sponsi

• If the water inlet hose is damaged, im-mediately disconnect the mains plugfrom the mains socket. Contact theService to replace the water inlet hose.

2. PRODUCT DESCRIPTION124379 5611 8 101Upper spray arm2Lower spray arm3Filters4Rating plate5Salt container6Water hardness dial7Rinse aid dispenser8Det

3Programme indicators4Display5Delay button6Start button7Indicators8Option buttonIndicators DescriptionWashing phase indicator. It comes on when the wa

3) With this programme you can wash a load with fresh soil. It gives good washing results in ashort time.4) Use this programme to quickly rinse the di

How to activate the Multitab option1.Press the on/off button to activate theappliance.2. Press Option until the Multitab indica-tor comes on.If you st

2. Fill the salt container.3.Fill the rinse aid dispenser.4. Open the water tap.5.Processing residues can stay in theappliance. Start a programme to r