Electrolux WOK38TCIO Uživatelský manuál Strana 22

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 36
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 21
22 electrolux what to do if …
What to do if
If you are unable to remedy the
problem by following the above
suggestions, please contact your
local Service Force Centre.
Problem Possible cause Remedy
The wok cannot be switched
on or is not operating
More than 10 seconds have
passed since the appliance
was switched on
Switch the appliance on again.
The child safety device is
switched on
l
Deactivate child safety device
(See the section “Child safety
device”)
Several sensor fields were
touched at the same time
Only touch one sensor field
Automatic switch off has been
triggered
Remove any objects (pan,
cloths, etc.) that are lying on
the control panel. Switch ap-
pliance on again
The residual heat indicator is
not displaying anything
The cooking zone was only on
for a short time and is therefore
not hot
If the cooking zone is sup-
posed to be hot, call the Cus-
tomer Service Department.
Power function cannot be
switched on
The Power function function
has already been activated
several times quickly one after
the other
Let cooking surface cool
down.
f
lights up Unsuitable cookware Use suitable cookware
No cookware on the cooking
zone
Put cookware on zone
e
and number are displayed Electronics fault Disconnect the appliance from
the electrical supply for a few
minutes (Take the fuse out of
the house’s wiring system)
If after switching on again,
e
is displayed again, call the
customer service department
It is very hard to adjust the heat
settings
Potential differences Do not touch the pan handle
when setting the heat settings
and do not position over the
control panel.
Zobrazit stránku 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 35 36

Komentáře k této Příručce

Žádné komentáře