Electrolux GK36DKG2O Uživatelský manuál stáhnout pdf (Strana 10)

easier cleaning, pan supports can be

removed from the hob. Lift up the pan

supports keeping them in horizontal

position as shown in the graphic.

Do not lift the pan supports at

an angle, as this will put strain

on the metal pins. This can

cause damage to the pins

and cause them to break.

The shape of pan supports and the

amount of burners can be different in

other models of the appliance.

6.4 Cleaning the hob

• Remove immediately: melted plastic,

plastic foil, and food with sugar. If not,

the dirt can cause damage to the hob.

• Remove when the hob is

sufficiently cool: limescale rings,

water rings, fat stains, shiny metallic

discoloration. Clean the hob with a

moist cloth and some detergent. After

cleaning, rub the hob dry with a soft

cloth.

• To clean the enamelled parts, cap and

crown, wash them with warm soapy

water and dry them carefully before

you put them back.

6.5 Cleaning of the Vertical

Burner

The crowns of brass burners can darken

after long use. To remove the dark marks,

do as follows:

1. Prepare a mixture of 50% water and

50% wine vinegar.

2. Soak the crowns in the mixture for no

longer than 10 minutes. Remove the

marks with a sponge. A high

concentration of moisture or

immersion of the burners in water for

too long can cause damage to their

surfaces.

3. Rinse the crowns in water to remove

the mixture and dry them carefully.

6.6 Cleaning the spark plug

This feature is obtained through a ceramic

ignition candle with a metal electrode.

Keep these components well clean to

prevent difficult lighting and check that the

burner crown holes are not obstructed.

6.7 Periodic maintenance

Speak to your local Authorised Service

Centre periodically to check the conditions

of the gas supply pipe and the pressure

adjuster, if fitted.

www.electrolux.com10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Komentáře k této Příručce

Žádné komentáře