Electrolux EHD90LLUM Uživatelský manuál Strana 22

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 26
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 21
Cutting the benchtop out
• Thebenchcutoutneedstobesizedby
using the supplied template.
• Acuttingaccuracyof1.5mmeither
side of the marked area needs to be
maintained.
Pull down clamps
• Thesearesuppliedinapartsbag
consisting of 4 clamps and 4 screws.
• Theclampsshouldbepre-assembled
onto the 4 brackets before dropping the
unit into the cutout.
Rubber seal
• Anoversizedlengthofrubbersealis
supplied in the parts pack
• Thisshouldbepushedintotherecess
ontheundersideoftheframe.Thejoin
should lie in the middle of one side.
• Thesealwillhavetobecuttolength
(add a few mm) and then the two ends
pushed up against one another.
20 installation instructions electrolux induction cooktop
Installation instructions
Zobrazit stránku 21
1 2 ... 17 18 19 20 21 22 23 24 25 26

Komentáře k této Příručce

Žádné komentáře