Electrolux EGU7658NOX Uživatelský manuál

EGU7658EN Hob User Manual

Stainless steel• Wash stainless steel parts with water,and then dry them with a soft cloth.• To remove burn food, fat andstubborn stains, let them soa

Problem Possible cause Remedy The fuse is blown. Make sure that the fuse isthe cause of the malfunc‐tion. If the fuse is blownagain and again, contac

C. Stick it on instruction booklet.8. INSTALLATIONWARNING!Refer to Safety chapters.8.1 Before the installationBefore you install the hob, write down t

4. Assemble the parts, follow the sameprocedure backwards.5. Replace the rating plate (it is near thegas supply pipe) with the one for thenew type of

8.7 Assembly1.2.3.min. 55 mmmin. 650 mm560 mm480 mmmin. 450 mm30 mm4.50 mm400 mmIf a furniture unit isinstalled at a distance of400 mm above the hob,t

8.CAUTION!Install the appliance only ona worktop with flat surface.8.8 Installing hob under thehoodIf you install the hob under ahood, please see thei

9.2 Bypass diametersBURNER Ø BYPASS 1/100 mmTriple Crown 56Semi-rapid 32Auxiliary 289.3 Other technical dataTOTAL POWER:Gas original: G20 (2H) 20 mbar

Type of hob Built-in hobNumber of gas burners 5Energy efficiency per gas burner(EE gas burner)Left rear - Semi-rapid 60%Right rear - Semi-rapid 60

www.electrolux.com18

ENGLISH 19

CONTENTS1. SAFETY INFORMATION...22. SAFETY INSTRUCTIONS...

www.electrolux.com/shop867329616-A-242016

instructions in a safe and accessible location for futurereference.1.1 Children and vulnerable people safety• This appliance can be used by children a

• CAUTION: The cooking process has to be supervised.A short term cooking process has to be supervisedcontinuously.• WARNING: Danger of fire: Do not st

• Always take care when moving theappliance as it is heavy. Always usesafety gloves and enclosed footwear.• Seal the cut surfaces with a sealant topre

2.4 UseWARNING!Risk of injury, burns andelectrical shock.• Remove all the packaging, labellingand protective film (if applicable)before first use.• Us

• Clean the appliance with a moist softcloth. Only use neutral detergents. Donot use any abrasive products,abrasive cleaning pads, solvents ormetal ob

4.1 Burner overviewABCA. Burner cap and crownB. ThermocoupleC. Ignition candleABCDA. Burner capB. Burner crownC. Ignition candleD. Thermocouple4.2 Ign

The spark generator canstart automatically when youswitch on the mains, afterinstallation or a power cut. Itis normal.4.3 Turning the burner offTo put