
11.4 Oven lamp
WARNING!
Be careful when you change the
oven lamp. Always switch off the
appliance before you start to re-
place the lamp. There is a risk of
electric shock.
WARNING!
Bulb lamps used in this appliance
are special lamps for use only in
household appliances. Do not use
them to illuminate household
rooms or parts of rooms. If you
need to replace a lamp, the re-
placement lamp must have the
same power and be for use only
in household appliances.
Before you change the oven lamp:
• Deactivate the appliance.
• Remove the fuses in the fuse box or
deactivate the circuit breaker.
• Put a cloth on the bottom of the oven.
This prevents from damage to the oven
light and glass cover.
Replacing the oven lamp:
1.
Find the lamp glass cover at the back
of the cavity.
Turn the lamp glass cover counter-
clockwise to remove it.
2.
Clean the glass cover.
3.
Replace the oven lamp with an appli-
cable 300 °C heat-resistant oven
lamp.
Use only the same oven lamp type as
the replacement lamp. It must have
the same power and be for use only
in household appliances.
4.
Install the glass cover.
12. WHAT TO DO IF…
Problem Possible cause Remedy
There is no spark when
lighting the gas
There is no electrical sup-
ply
Make sure that the unit is
connected and the elec-
trical supply is switched
on.
There is no spark when
lighting the gas
There is no electrical sup-
ply
Examine the house elec-
trical installation fuse.
There is no spark when
lighting the gas
Burner cap and crown
are placed uneven
Make sure that the burner
cap and crown are in cor-
rect positions.
The flame is blow out im-
mediately after ignition
Thermocouple is not
heated sufficient
After lightning the flame,
keep the knob pushed for
approximately 5 seconds.
The gas ring burns un-
evenly
Burner crown is blocked
with food residues
Make sure that the injec-
tor is not blocked and the
burner crown is clear of
food particles.
The oven does not heat
up
The oven is not switched
on
Switch on the oven
The oven does not heat
up
The clock is not set Set the clock
The oven does not heat
up
The necessary settings
are not set
Control the settings
22
www.electrolux.com
Komentáře k této Příručce