Electrolux EHT70838K Uživatelský manuál stáhnout pdf (Strana 18)

18 electrolux

Commissioning

By pass screw

When the hob has been fully installed it will be necessary to check the minimum flame setting.

To do this, follow the procedure below.

- Turn the gas tap to the MAX position and ignite.

- Set the gas tap to the MIN flame position then turn

the control knob from MIN to MAX several times.

If the flame is unstable or is extinguished follow

the procedure below.

Procedure:

Re-ignite the burner and set to MIN.

Remove the control knob, insert a thin

bladed screwdriver down the centre of

the gas tap control shaft and turn the adjustment screw until the flame is steady and does not

extinguish, when the knob is turned from MIN to MAX.

Repeat this procedure for all burners.

)

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 47 48

Žádné komentáře

Electrolux EHT70838K Uživatelský manuál Strana 18