Electrolux END52800X Uživatelský manuál stáhnout pdf (Strana 11)

• Freezer light (where fitted)

1. Switch off the power at the power point and

remove the refrigerator’s power cord from the

power point.

2. Carefully unclip the light cover. You do this by

pulling the light cover tab at the rear towards the

front of the cabinet.

3. Unscrew the light bulb and replace it with a bulb

that is the same as the original.

4. Replace the light cover by hooking the light cover

lugs into the front of the housing and pressing the

rear of the cover up until it clips in.

5. Wait 5 minutes to ensure pressures in the

refrigeration system are equalized. Then reconnect

and turn the refrigerator on at the power point.

electrolux refrigeration care and maintenance 11

Changing the light bulb

•Refrigerator Light

1. Switch off the power at the power point and

remove the refrigerator’s electric cord fromthe

power point.

2. Carefully unclip the light cover. You do this by

pulling the light cover tab at the reartowards the

front of the cabinet.

3. Unscrew the light bulb and replace it with a bulb

that is the same as the original (25 watts)

4. Replace the light cover by hooking the light cover

lugs into the front of the housing and pressing the

rear of the cover up until it clips in.

5. Wait 5 minutes to ensure pressures in the

refrigeration system are equalized. Then turn the

refrigerator on at the power point.

Care and maintenance

Top freezer model

(electronic models only)

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 66 67

Žádné komentáře

Electrolux END52800X Uživatelský manuál Strana 11