Electrolux EWF148543W Uživatelský manuál

EWF 148543 W... ...EN WASHING MACHINE USER MANUAL

Caution! If you turn the programmeselector dial to another programmewhen the machine is working, the redpilot light of button 8 will blink 3 timesand

SELECT THE TIME MANAGER OPTIONBY PRESSING BUTTONS 9By pressing these buttons repeatedly, theduration of the washing cycle can be in-creased or decreas

3. Reduce the spin speed if needed, bypressing the relevant button.4. Press button 8.At the end of the programme, the icon 2.8disappears and the door

etc.), the colour, washing temperature anddegree of soiling.All commonly available washing machinedetergents may be used in this appliance:• powder de

Programme - Maximum and Minimum Tempera-ture - Cycle Description - Maximum Spin Speed -Maximum Fabrics Load - Type of LaundryOptionsDetergent Com-part

Programme - Maximum and Minimum Tempera-ture - Cycle Description - Maximum Spin Speed -Maximum Fabrics Load - Type of LaundryOptionsDetergent Com-part

Programme - Maximum and Minimum Tempera-ture - Cycle Description - Maximum Spin Speed -Maximum Fabrics Load - Type of LaundryOptionsDetergent Com-part

Programmes Load(kg)Energy con-sumption(kWh)Water con-sumption (li-tre)Approximateprogrammeduration (mi-nutes)Remainingmoisture(%)1)Wool/Hand wash30 °C

Flush it out under a tap, to remove anytraces of accumulated powder.To aid cleaning, the top part of the additivecompartment should be removed. Clean

1. Open the pump door.2. Put a container below the recess of thedrain pump to collect the water thatflows out.3. Press the two levers and pull forward

Electrolux. Thinking of you.Share more of our thinking at www.electrolux.comCONTENTSSafety information 2Safety instructions 3Product description

refitting the pump cover, ensure it is se-curely re-tightened so as to stop leaks andyoung children being able to remove it.CLEANING THE WATER INLETFI

WHAT TO DO IF…Certain problems are due to lack of simplemaintenance or oversights, which can besolved easily without calling out an engi-neer. Before

Problem Possible cause/SolutionThere is water on the floor:Too much detergent or unsuitable detergent (creates too muchfoam) has been used.• Reduce th

If you are unable to identify or solve theproblem, contact our service centre. Beforetelephoning, make a note of the model, se-rial number and purchas

3. Unscrew the three bolts.4. Slide out the relevant plastic spacers.5. Open the porthole. Remove the poly-styrene block fitted on the door seal.Remov

2. Do not place the inlet hose downwards.Angle the hose to the left or right de-pending on the position of your watertap.3. Set the hose correctly by

collection point for the recycling of electricaland electronic equipment. By ensuring thisproduct is disposed of correctly, you willhelp prevent poten

electrolux 27

www.electrolux.com/shop 132936771-A-482012

• Obey the maximum load volume of 8 kg (refer to the “Pro-gramme chart” chapter).• If the supply cord is damaged, it must be replaced by themanufactur

• Before you connect the appliance to newpipes or pipes not used for a long time,let the water flow until it is clean.• The first time you use the app

DETERGENT DISPENSER DRAWER Compartment for detergent used forprewash and soak phase or for stain re-mover used during the stain action phase (ifavaila

CONTROL PANELBelow is a picture of the control panel. It shows the programme selector dial as well asthe buttons, pilot lights and the display. These

DISPLAY2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.92.12 2.11 2.10The display shows the following informa-tion:2.1: Temperature value2.2:Temperature icons , C

2.9:• Duration of the set programme: after selecting a programme, the duration is dis-played in hours and minutes (for example ). The duration is cal

CHILD SAFETY LOCKThis device permits you to leave the appli-ance unattended and not to worry that chil-dren might be injured by or cause damageto the