Electrolux EHGT326X Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro ne Electrolux EHGT326X. Electrolux EHGT326X User Manual Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 12
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
1
Built-in Hob
Mod. EHGT326X
INSTRUCTION BOOKLET
35689-5601
HR-SI-CZ-SL-RO
Zobrazit stránku 0
1 2 3 4 5 6 ... 11 12

Shrnutí obsahu

Strany 1 - INSTRUCTION BOOKLET

1Built-in HobMod. EHGT326XINSTRUCTION BOOKLET35689-5601HR-SI-CZ-SL-RO

Strany 2 - For Your Safety

10Kitchen unit with doorProper arrangements must be taken in designing theforniture unit, in order to avoid any contact with thebottom of the hob whic

Strany 4 - Cleaning and Maintenance

03/05Grafiche MDM - Forlì From the Electrolux Group. The world’s No.1 choice.The Electrolux Group is the world’s largest producer of powered

Strany 5 - Original spare parts

2These instructions are only for the countries stated by the symbolprinted on the front cover of this instruction book.During Operation• This applianc

Strany 6 - Technical Data

3The following symbols will be found in the text toguide you throughout the Instructions:Safety InstructionsStep by step instructions for an operation

Strany 7 - Electrical Connection

4If you cannot light the flame even after severalattempts, check the "cap" (Fig. 1 lett. A) and the"crown" (Fig. 1 lett. B) are in

Strany 8 - Adjusting the minimum level

5Guarantee - After Sales ServiceOriginal spare partsThis appliance, before leaving the factory, hasbeen tested and studied by many experts andspeciali

Strany 9 - Building In

6Instruction for the InstallerThe following instructions about installationand maintenance must be carried out byqualified personnel in compliance wit

Strany 10 - Possibilities for insertion

7The appliance is designed to be connected to 230 Vmonophase electricity supply.The connection must be carried out in compliance withthe laws and regu

Strany 11

8Replacing the burner injectors1. Remove the pan supports.2. Remove the burner's caps and crowns.3. With a socket spanner 7 unscrew and remove th

Strany 12 - 03/05

9Building InThese hobs can be inserted in a built-in kitchen unitwhose depth is between 550 and 600 mm. The hobsdimensions are shown in Fig. 8.Fig. 10

Komentáře k této Příručce

Žádné komentáře