Electrolux EB4SL60SP Uživatelský manuál stáhnout pdf (Strana 19)

45°

3.

Close the door until it is at an angle

of approximately 45°.

4.

Hold the door with one hand on each

side and pull it away from the appli-

ance at an upwards angle.

Put the door with the outer side

down on a soft and level surface

to prevent scratches.

Installing the door

To install the door do the above steps in

the opposite sequence.

11.4 Lamp

WARNING!

There is a risk of electrical shock.

The lamp and the lamp glass cov-

er can be hot.

Before you change the lamp:

• Deactivate the appliance.

• Remove the fuses from the fuse box or

deactivate the circuit breaker.

CAUTION!

Put a cloth on the bottom of the

interior of the appliance. It pre-

vents damage to the lamp glass

cover and the cavity.

Always use the same lamp type.

Replacing the lamp at the cavity

ceiling:

1.

Turn the lamp glass cover counter-

clockwise to remove it.

2.

Clean the glass cover.

3.

Replace the lamp with an applicable

300 °C heat-resistant lamp.

4.

Install the glass cover.

Replacing the lamp on the left side of

the cavity

1.

Remove the left shelf support to get

access to the lamp.

2.

Use a narrow, blunt object (e.g. a tea-

spoon) to remove the glass cover.

Clean the glass cover.

3.

If necessary, replace the lamp with an

applicable 300 °C heat-resistant

lamp.

4.

Install the glass cover.

5.

Install the shelf support.

12. WHAT TO DO IF…

WARNING!

Refer to the Safety chapters.

ENGLISH 19

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

Komentáře k této Příručce

Žádné komentáře