Electrolux A310EBP Uživatelský manuál Strana 5

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 8
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 4
5
TROUBLE-SHOOTING
Before you call a service engineer, carry out the following simple tests.
Is there a power failure? Check the fuses.
Is the plug firmly connected to the socket and is the socket switched on? Check
the socket by plugging in another appliance, eg a table lamp.
Is the thermostat at the correct setting? (normally 3 or 4).
Has the door not been closed properly causing the inside temperature to rise too
quickly?
Is the refrigerator level?
Has the ventilation become obstructed?
If after checking all the above points, the refrigerator is still not working
satisfactorily, contact your nearest service engineer.
This refrigerator is equipped with overheating protection. An authorised service
technician can check whether this has been triggered or not.
State the problem, model and product number. (Details of the model and product
number are to be found on the data label in the top left of the inside compartment.)
INPORTANT ADVICE
Do
- Make sure that drinks and food, particularly those with a strong smell, are
closed tightly or well packed;
- Close the door properly after use. The door should only be left open a little
when the refrigerator is switched off;
Do not
- Use sharp objects to remove the frost layer or free the ice tray,
- Obstruct the airflow on or above the cooling unit,
- Put any hot or warm food/drinks into the refrigerator - allow them to cool down
first
Sodium chromate is used for corrosion protection (less than 2 weight % of the
coolant).
Zobrazit stránku 4
1 2 3 4 5 6 7 8

Komentáře k této Příručce

Žádné komentáře