
Clean the glass lid only with warm water and
avoid the use of rough cloths or abrasive
substances.
After a proper cleaning, carefully reposition
the lid into its hinges.
Balancing the lid
Appliances provided with glass lids are
equipped with specially balanced springs, in-
serted in the hinges at the back of the appli-
ance, to allow the lid to be closed smoothly
and easily.
You can use a screwdriver to adjust the clo-
sure of the lid. The necessary force for open-
ing/closing the lid can be increased by turn-
ing the adjusting screw 2 or 3 times as
shown .
Controls - sundries
Periodically check the condition of the flexible
pipe of gas connection and make it replaced
by skilled technicians as soon as it shows
abnormalities. Annual replacement is recom-
mended.
Oven lamp replacement
Warning! Disconnect the appliance
from the electricity supply.
If the oven bulb needs replacing, it must
comply with the following specifications:
electric power, 15 W /25 W; electric rate, 230
V (50 Hz); resistant to temperatures of 300
°
C; connection type: E 14. These bulbs are
available from your local Service Force Cen-
tre.
To replace the faulty bulb:
1. Ensure the oven is disconnected from the
electrical supply.
2. Turn the glass cover anticlockwise.
3. Remove the faulty bulb and replace it with
the new one.
4. Refit the glass cover.
5. Reconnect to the electrical supply.
What to do if…
If the appliance is not working correctly, please carry out the following checks, before con-
tacting your local Service Centre.
20 electrolux
Komentáře k této Příručce