Electrolux EHT60410K Uživatelský manuál stáhnout pdf (Strana 18)

18 electrolux

Fitting the Hob into the Worktop

Before fitting the hob into the cut out, an

adhesive seal must be fitted to the underside

outside edge of the hob. It is essential that no

gaps are left in this seal in order to prevent

spillage near the hob seeping into the cabinet

below.

1) Remove the pan supports, the burners

caps and crowns and turn the hob

upside down, taking care the ignition

candles are not damaged in this

operation.

2) Place the sealing gasket (C) all around

the glass top edge as shown in diagram

A.

3) Place the hob in the cut out,

taking care of its centring.

4) Fit the hob in the cut out and push it

down until the glass top and the working

top make contact, as shown in diagram

B.

CC

CC

C

C) Sealing gasket

A

B

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 27 28

Komentáře k této Příručce

Žádné komentáře