Electrolux EHD60150P Uživatelský manuál stáhnout pdf (Strana 6)

Sensor field Function

9

A control bar To set the heat setting.

10

/

To increase or decrease the time.

11

To set a cooking zone.

12

To activate and deactivate the STOP+GO function.

RESIDUAL HEAT INDICATOR

Warning! The risk of burns from

residual heat!

The induction cooking zones make the heat

necessary for cooking directly in the bottom

of the cookware. The glass ceramic is hot

from the heat of the cookware.

DAILY USE

ACTIVATION AND DEACTIVATION

Touch

for 1 second to activate or deac-

tivate the appliance.

AUTOMATIC SWITCH OFF

The function deactivates the appliance

automatically if:

• All cooking zones are deactivated.

• You do not set the heat setting after you

activate the appliance.

• You spill something or put something on

the control panel for more than 10 sec-

onds, (a pan, a cloth, etc.). An acoustic

signal sounds some time and the appli-

ance deactivates. Remove the object or

clean the control panel.

• The appliance becomes too hot (e.g.

when, a saucepan boils dry). Before you

use the appliance again, wait for the

cooking zone to cool down.

• You use incorrect cookware. The symbol

comes on and the cooking zone de-

activates automatically after 2 minutes.

• You do not deactivate a cooking zone or

change the heat setting. After some time

comes on and the appliance deacti-

vates. See below.

• The relation between heat setting and

times of the Automatic Switch Off func-

tion:

• 1 - 2— 6 hours

• 3 - 4 — 5 hours

• 5 — 4 hours

• 6 - 9 — 1.5 hours

THE HEAT SETTING

Touch the control bar at the heat setting.

Move your finger along the control bar to

change the setting. Do not release before

you have a correct heat setting. The display

shows the heat setting.

B

AUTOMATIC HEAT UP

1

2

3

4

5

6

7

8

9

10

11

0

123456789

You can get a necessary heat setting in a

shorter time if you activate the Automatic

Heat Up function. This function sets the

highest heat setting for some time (see the

illustration), and then decreases to the nec-

essary heat setting.

To start the Automatic Heat Up function for

a cooking zone:

1.

Touch

(the indicator comes on).

2. Immediately touch the necessary heat

setting.

6 electrolux

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Komentáře k této Příručce

Žádné komentáře