Electrolux GK58IPLCN Uživatelský manuál stáhnout pdf (Strana 9)

4. DAILY USE

WARNING!

Refer to Safety chapters.

4.1 Operating the hob

You operate the hob with the knobs of the

oven and control panel of the hob. The

"Daily use" chapter for the oven tells how

to operate the hob.

4.2 Automatic Switch Off

The function deactivates the hob

automatically if:

• all cooking zones are deactivated,

• you do not set the heat setting after

you activate the hob,

• you spill something or put something

on the control panel for more than 10

seconds (a pan, a cloth, etc.). An

acoustic signal sounds and the hob

deactivates. Remove the object or

clean the control panel.

• the hob gets too hot (e.g. when a

saucepan boils dry). Let the cooking

zone cool down before you use the

hob again.

• you use incorrect cookware. The

symbol comes on and the cooking

zone deactivates automatically after 2

minutes.

• you do not deactivate a cooking zone

or change the heat setting. After some

time comes on and the hob

deactivates.

The relation between the heat setting

and the time after which the hob

deactivates:

Heat setting The hob deacti-

vates after

, 1 - 2

6 hours

3 - 4 5 hours

5 4 hours

6 - 9 1.5 hour

4.3 Using the cooking zones

Put the cookware on the cross / square

which is on the surface that you cook.

Cover the cross / square fully. Induction

cooking zones adapt to the dimension of

the bottom of the cookware automatically.

You can cook with the large cookware on

two cooking zones at the same time.

4.4 Bridge function

The function operates when

the pot covers the centres of

the two zones.

This function connects two cooking zones

and they operate as one.

You can use this function for cookware

larger than 260 mm.

First set the heat setting for one of the rear

cooking zones.

The knobs for the front cooking zone do

not operate with this function. Only the

knobs for the rear zones operate.

To activate the function for left / right

cooking zones: touch

/ . To set or

change the heat setting turn the knob for

the rear zone to the left / right.

To deactivate the function: touch /

. The cooking zones operate

independently. The symbol appears on

the front left / right zone. If the heat setting

is still selected turn the knob to zero and

then set the new heat setting.

When you use only one cooking zone of

the pair we recommend that you use the

rear cooking zone. Also when you use

large cookware we recommend that you

put it near to the rear cooking zone.

4.5 Automatic Heat Up

If you activate this function you can get a

necessary heat setting in a shorter time.

The function sets the highest heat setting

for some time and then decreases to the

correct heat setting.

ENGLISH

9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 23 24

Komentáře k této Příručce

Žádné komentáře