Electrolux ETN1224 Uživatelský manuál stáhnout pdf (Strana 6)

- 6 -

Use

Refrigerator

Turn the thermostat control to an middel setting and

then re-adjust to a temperature of +5°C after a few

days if necessary. The right-hand numbers on the

control correspond to the lower temperature in the

refrigerator.

Glass ceramic hob

The glass ceramic hob has two heating zones and a

heat warning indicator. During use, the heating zones

will fluctuate on and off in order to maintain the set

temperature.

The heating zones will switch on and off for varying

lengths of time depending on the temperature

selected. A high heat will result in longer periods when

the power is switched on. However, even on the

maximum setting, the zones will be switched on and

off by an overheating safety device when the heat

becomes too high/low.

The heat warning indicator consists of two lights,

which light up when the corresponding zone is too hot

to touch.

The hob has two heating zones, which are adjusted by

turning the knob which has 13 settings - 12

temperature settings and a ‘0’ position. The indicator

light will come on when a ring is switched on.

Pretreating the glass ceramic hob

Rub a thin layer of the abrasive cleaning agent

provided into the glass ceramic hob. Use a clean,

damp cloth or a piece of kitchen roll.

If necessary, remove any excess cleaning

agent. Any leftover cleaning agent could

become etched onto the hob the next time it

becomes hot.

Remember to only use cooking equipment with a flat

base in order to avoid poor heat contact. To save

energy and time, the base of the saucepan/frying pan

should be smooth and the same size as the heating

zone.

Handy hints

■ Aluminium has a good thermal conductivity, but

can leave silvery marks on the hob.

■ Copper has a greater tendency to become

damaged when hot than other materials.

■ Enamel bases (particularly coarsely patterned

bases) and saucepans/pots made from glass can,

if they are pulled forwards and backwards on the

hob, wear out the markings more easily than other

types of base.

■ Flakes of paint can fall off lacquered saucepans

and burn onto the hob.

When buying new saucepans and frying pans,

you should choose types that are recommended

for glass ceramic hobs wherever possible, e.g.

stainless saucepans with a sandwich base, i.e. a

base with layers of different metals.

Using the timer function

All minikitchens with a glass ceramic hob also have

an inbuilt timer function. The heating zones cannot

become hot until a time has been set on the timer.

The timer can be set to a maximum of 60 min. If you

need the heating zones to be switched on for longer,

e.g. when cooking something that takes a long time,

you will have to reset the required time on the timer.

You can also set the required time on the timer if you

want the heating zones to switch off automatically.

After you have set the timer, set the required heat

setting using the heating zone knob. At the end of the

preset time, the zone will be switched off and the

indicator light will go out.

Remember to reset the heating zone knob to zero

when you have finished using the appliance.

aluminium

1 2 3 4 5 6 7 8 9 10 11 12

Komentáře k této Příručce

Žádné komentáře

Electrolux ETN1224 Uživatelský manuál Strana 6

Komentáře k této Příručce

Související produkty a manuály pro Sporáky Electrolux ETN1224