Electrolux EKG913A0OW Uživatelský manuál stáhnout pdf (Strana 20)

Before activating the catalytic

cleaning remove all the

accessories from the oven.

The walls with a catalytic coating are self-

cleaning. They absorb fat which collects

on the walls while the appliance operates.

To support the self-cleaning procedure,

heat the empty oven on a regular basis.

1. Clean the oven floor with warm water

and washing up liquid, then dry it.

2. Set the oven temperature to 250 °C

and let the oven operate for 1 hour.

3. When the appliance is cool, clean it

with a soft and moist sponge.

12.4 Cleaning the oven door

The oven door has two panels of glass

installed one behind the other. To make

the cleaning easier remove the oven door.

WARNING!

The oven door can close if

you try to remove the internal

panel of glass when the door

is still assembled.

Do not lose the screws.

1. Open the door fully and hold the two

door hinges.

2. Lift and turn the levers on the two

hinges.

3. Close the oven door to the first

opening position (halfway). Then pull

forward and remove the door from its

seat.

4. Put the door on a soft cloth on a

stable surface.

5. Use a screwdriver to remove 2 screws

from bottom edge of door.

Use a spatula made of wood or plastic

or equivalent to open the inner door.

www.electrolux.com20

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 31 32

Žádné komentáře

Electrolux EKG913A0OW Uživatelský manuál Strana 20