Electrolux EKC60751X Uživatelský manuál stáhnout pdf (Strana 18)

17

Using grids, baking plates and roasting pan

It is important for the oven grid, the baking

plate and the roasting pan to be fixed

between the stops at the front and rear edges

of the rails to prevent them from falling off

the rails. Place the baking plate/roasting pan/

grid in the rear edge and fix against the front

edge. The locating pin fits into a slot under

the edge of the baking plate/roasting pan,

which means that the baking plate/roasting

pan are held in position.The rails must be in

their pushed-in position when the grid/

baking plate/roasting pan are inserted. For

the best shelf stability, make sure that the

bevelled edge is inwards in the oven. Pull

the accessories carefully when using them so

that the plate/pan/grid does not fall off the

rails. Maximum load 20kg (44 lb.).

Using the oven grid

The locating pin is not used for the grid. The

oven grid has a marking on its upper surface.

This marking must be at the front (towards

the oven door) when in use. Make sure that

food placed on the grid is positioned behind

the marking. Otherwise there is a risk that it

will not be cooked properly at the front. The

grid can be placed in the roasting pan. The

maximum weight to be placed on the grid is

10kg (22 lb.).

CAUTION! Make sure that the

locating pin hooks in under the shelf/

roasting pan and that the shelf/

roasting pan rests on the rails,

otherwise it can fall off the rails in the

pulled-out position. When the shelf/

roasting pan is removed in the pulled-

out position, the rails must be pushed

back again so that the oven door can

be closed. Use oven gloves because

the rails are hot.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 63 64

Komentáře k této Příručce

Žádné komentáře