
7
Before Using for the first time
Initial Cleaning
Wipe the ceramic glass surface with a damp cloth.
1 Important: Do not use any caustic, abrasive
cleaners! The surface could be damaged.
Operating the hob
Touch Control Sensor Field
To operate the Touch Control sensor field place your
finger from above flat onto the required field until the
appropriate displays come on or go out or the re-
quired function is carried out.
Switching on the appliance
The entire appliance is switched on using the ”On/
Off” sensor panel .
Touch the “On/Off” sensor panel for approx. two
seconds.
The digital displays will show ¾.
3 After the “On/Off” sensor panel has been ac-
tuated to switch on your appliance, a cooking
setting must be selected for a cooking zone
within approx. 10 seconds, or a time must be
set using the timer (egg timer function). If not,
the appliance will switch itself off again for rea-
sons related to safety.
Switching off the appliance
To completely switch off the appliance, actuate the
“On/Off” sensor panel .
Touch the “On/Off” sensor panel for approx. one
second.
3 After switching off a single cooking zone or the
entire cooking surface, the existing residual
warmth will be displayed in the digital displays
of the corresponding cooking zones in the
form of h (for “hot”).
Komentáře k této Příručce