Electrolux EHH9967FOZ Uživatelský manuál stáhnout pdf (Strana 9)

Heat setting The hob deacti-

vates after

4 - 7 5 hours

8 - 9 4 hours

10 - 14 1.5 hour

4.3 The heat setting

To set or change the heat setting:

Touch the control bar at the correct heat

setting or move your finger along the

control bar until you reach the correct heat

setting.

4.4 Cooking zone indication

CAUTION!

Do not place hot cookware

on the control panel.

There is risk of damage to the

electronic parts.

The horizontal line shows the maximum

size of the cookware.

max.

Refer to “Technical information” chapter.

4.5 Bridge function

This function connects two cooking zones

and they operate as one.

You can use this function for cookware

larger than 260 mm.

First set the heat setting for one of the

cooking zones.

To activate the function: touch . To

set or change the heat setting touch one

of the control sensors.

To deactivate the function: touch .

The cooking zones operate independently.

4.6 Automatic Heat Up

If you activate this function you can get a

necessary heat setting in a shorter time.

The function sets the highest heat setting

for some time and then decreases to the

correct heat setting.

To activate the function the

cooking zone must be cold.

To activate the function for a cooking

zone: touch ( comes on).

Immediately touch the correct heat

setting. After 3 seconds comes on.

To deactivate the function: change the

heat setting.

4.7 Power function

This function makes more power available

to the induction cooking zones. The

function can be activated for the induction

cooking zone only for a limited period of

time. After this time the induction cooking

zone automatically sets back to the

highest heat setting.

ENGLISH

9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 67 68

Komentáře k této Příručce

Žádné komentáře